Actual-size coins
31 everyday coins from six currencies, each drawn at the diameter its mint or central bank publishes. Choose a currency, then lay a real coin on its circle to compare.
Not calibrated yet Sizes are estimates until you calibrate with a bank card or a coin.
Sizes are estimates until you calibrate.
Something on the page is covering part of the coins. Scroll until every circle is clear before you lay a coin on one.
Comparing a coin with its circle
Pick the currency, lay the coin flat on its circle and look straight down. On a calibrated screen the coin's rim sits on the circle's outline. A coin that clearly overhangs or leaves a gap means the screen needs calibrating again; worn coins and raised rims can differ by a fraction of a millimetre, which is normal.
The same coins work the other way round: in the calibration window, choose Coin, pick one from this list and match the circle to it. That is handy when no bank card is to hand.
Advertisement
Where each diameter comes from
Every size here is the diameter the issuing authority states for that coin: the United States Mint, the European Central Bank, the Royal Mint, the Royal Canadian Mint, the Royal Australian Mint and the Japan Mint. The tables below link to each page, as checked in October 2026. US sizes are set in inches by law, so the inch column is the official figure there and the millimetres are the Mint's own conversion.
Coins left out
Only round coins are drawn. The euro 20 cent has notches in its edge, the UK 20p and 50p have seven curved sides, the UK £1 has twelve, Canada's $1 has eleven and Australia's 50c has twelve, so a single width doesn't describe them. Coins rarely seen in change, such as the US half dollar, are left out too. The 5 and 50 yen are drawn with their centre holes.
Coin diameters by currency
| Coin | Diameter | Inches | Source |
|---|---|---|---|
| Penny (1¢) | 19.05 mm | 0.750 in | United States Mint, coin specifications |
| Nickel (5¢) | 21.21 mm | 0.835 in | United States Mint, coin specifications |
| Dime (10¢) | 17.91 mm | 0.705 in | United States Mint, coin specifications |
| Quarter (25¢) | 24.26 mm | 0.955 in | United States Mint, coin specifications |
| Coin | Diameter | Inches | Source |
|---|---|---|---|
| 1 cent | 16.25 mm | 0.640 in | European Central Bank, euro coins: common sides |
| 2 cent | 18.75 mm | 0.738 in | European Central Bank, euro coins: common sides |
| 5 cent | 21.25 mm | 0.837 in | European Central Bank, euro coins: common sides |
| 10 cent | 19.75 mm | 0.778 in | European Central Bank, euro coins: common sides |
| 50 cent | 24.25 mm | 0.955 in | European Central Bank, euro coins: common sides |
| €1 | 23.25 mm | 0.915 in | European Central Bank, euro coins: common sides |
| €2 | 25.75 mm | 1.014 in | European Central Bank, euro coins: common sides |
| Coin | Diameter | Inches | Source |
|---|---|---|---|
| 1p | 20.32 mm | 0.800 in | The Royal Mint, 2026 UK definitive coin set specifications |
| 2p | 25.91 mm | 1.020 in | The Royal Mint, 2026 UK definitive coin set specifications |
| 5p | 18.00 mm | 0.709 in | The Royal Mint, 2026 UK definitive coin set specifications |
| 10p | 24.50 mm | 0.965 in | The Royal Mint, 2026 UK definitive coin set specifications |
| £2 | 28.40 mm | 1.118 in | The Royal Mint, 2026 UK definitive coin set specifications |
| Coin | Diameter | Inches | Source |
|---|---|---|---|
| 5¢ | 21.20 mm | 0.835 in | Royal Canadian Mint, 5 cents |
| 10¢ | 18.03 mm | 0.710 in | Royal Canadian Mint, 10 cents |
| 25¢ | 23.88 mm | 0.940 in | Royal Canadian Mint, 25 cents |
| $2 (toonie) | 28.00 mm | 1.102 in | Royal Canadian Mint, 2 dollars |
| Coin | Diameter | Inches | Source |
|---|---|---|---|
| 5c | 19.41 mm | 0.764 in | Royal Australian Mint, five cents |
| 10c | 23.60 mm | 0.929 in | Royal Australian Mint, ten cents |
| 20c | 28.65 mm | 1.128 in | Royal Australian Mint, twenty cents |
| $1 | 25.00 mm | 0.984 in | Royal Australian Mint, one dollar |
| $2 | 20.50 mm | 0.807 in | Royal Australian Mint, two dollars |
| Coin | Diameter | Inches | Source |
|---|---|---|---|
| 1 yen | 20.00 mm | 0.787 in | Japan Mint, coins presently minted |
| 5 yen (hole 5 mm) | 22.00 mm | 0.866 in | Japan Mint, coins presently minted |
| 10 yen | 23.50 mm | 0.925 in | Japan Mint, coins presently minted |
| 50 yen (hole 4 mm) | 21.00 mm | 0.827 in | Japan Mint, coins presently minted |
| 100 yen | 22.60 mm | 0.890 in | Japan Mint, coins presently minted |
| 500 yen | 26.50 mm | 1.043 in | Japan Mint, coins presently minted |
More measuring tools
Advertisement
Advertisement
Advertisement