Ring sizer and ring size guide

Lay a ring that fits you flat on the screen and size the circle to its inside edge, or measure round your finger with a strip of paper. Your US, UK and EU ring sizes appear underneath.

Not calibrated yet Sizes are estimates until you calibrate with a bank card or a coin.

US and Canada
UK and Australia
EU and ISO

Drag outward from the centre, or use the slider, until the circle meets the ring's inside edge all the way round.

Already measured? Enter it

Enter a lengthFrom a strip of paper or a string wrapped round your finger, or a ring's inside width.

How to find your ring size on screen

  1. Check the status line above the circle. On an iPhone, iPad, MacBook or recent Pixel or Galaxy phone the circle is already at actual size; on any other screen, calibrate with a bank card first.
  2. Lay a ring that fits the finger you're sizing flat on the screen, over the circle.
  3. Drag outward from the centre, or use the slider, until the edge of the circle sits exactly under the inside edge of the ring. Leave out the metal of the band itself.
  4. Read your US, UK and EU sizes under the circle. The inner diameter and circumference are shown in millimetres too.

To compare a ring with a size you already know, choose it under Show a size and lay the ring on the circle.

Advertisement

How to measure your ring size with paper or string

No ring to hand? Measure the finger itself. A strip of paper works better than string, which stretches and twists.

  1. Cut a strip of paper about 5 mm wide and 10 cm long.
  2. Wrap it round the base of the finger, snug but not tight, and mark where the end overlaps.
  3. Check that the loop slides over your knuckle. If it doesn't, loosen it until it does: the ring has to.
  4. Lay the strip on the on-screen ruler and measure from the end to your mark, then enter the length above.

Or print the ring sizing strip from the printable ruler page at actual size: it wraps round the finger and reads the size directly, and the sheet has a circle for each size to check a ring against.

Measuring a ring with a ruler

To size a ring without laying it on the screen, measure straight across the inside, through the centre, from one inner edge to the other. Choose Across a ring above and enter the width. A millimetre either way is about one and a quarter US sizes, so measure carefully, or use the circle above, which reads to a tenth of a millimetre.

Advertisement

Getting the right fit

Fingers are larger at the end of the day and in warm weather, and smaller when cold, so measure more than once. A ring has to pass over the knuckle; if yours is wide, pick the size that slides over it. Wide bands, around 6 mm and up, feel tighter than narrow ones, and many jewellers suggest going up half a size for them. If you're between two sizes, ask the seller which to choose.

Where the size scales come from

EU and ISO sizes follow ISO 8653, the international standard, which defines a ring's size as its inner circumference in millimetres, rounded to the nearest millimetre. We checked the definition in India's IS 15892:2011, which is identical to the 1986 edition of the standard. For more on this scale, see ring size in mm.

US and Canadian sizes have no official dimensions. When the US Bureau of Standards looked into them (Circular 43, 1921), it found the scale came from a ring gauge patented in 1874, and that gauges in different shops differed by about a third of a size. The sizes here use the common scale, in which each whole size adds 0.032 inch (0.81 mm) across, inside the range of the gauges the Bureau measured.

UK and Australian sizes use the jewellers' letter scale, A to Z with half sizes, then Z+1 and up. We know of no published standard for it to cite, so treat the letters as the usual trade figures. With any scale, the sizer of the jeweller you buy from is the final word.

US and CanadaUK and AustraliaEU and ISOInner diameterCircumference
3F4414.1 mm44.2 mm
3½G4514.5 mm45.5 mm
4H4714.9 mm46.8 mm
4½I4815.3 mm48.0 mm
5J4915.7 mm49.3 mm
5½K½5116.1 mm50.6 mm
6L½5216.5 mm51.9 mm
6½M½5316.9 mm53.1 mm
7N½5417.3 mm54.4 mm
7½O½5617.7 mm55.7 mm
8P½5718.1 mm57.0 mm
8½Q½5818.5 mm58.2 mm
9R½6018.9 mm59.5 mm
9½S½6119.4 mm60.8 mm
10T½6219.8 mm62.1 mm
10½U½6320.2 mm63.3 mm
11V½6520.6 mm64.6 mm
11½W½6621.0 mm65.9 mm
12X½6721.4 mm67.2 mm
12½Y½6821.8 mm68.5 mm
13Z½7022.2 mm69.7 mm

More measuring tools

Advertisement

Advertisement

Advertisement