Measure your pupillary distance (PD)

Your PD is the distance between the centres of your pupils, in millimetres. Turn your phone into a PD ruler and read it in a mirror, or have someone read it for you. No camera is used.

Not calibrated yet Sizes are estimates until you calibrate with a bank card or a coin.

1. Hold up the ruler

  1. Stand about 20 cm (8 in) from a mirror in good light, and open the PD ruler below. Its numbers are reversed so they read the right way round in the mirror.
  2. Hold the phone sideways, screen towards the mirror, with its edge resting just above your eyebrows and level.
  3. Close your right eye. Line up 0 with the centre of your left pupil.
  4. Keep still. Close your left eye, open your right, and read the line at the centre of your right pupil. That is your PD.
The ruler is an estimate until the screen is calibrated.

2. Enter your readings

Enter a readingMeasure two or three times: the average is more reliable than any single reading.

Bars: the middle 90% of adults in the survey (light) and the middle half (dark), with the median line. Measured in millimetres.

What your PD is for

Glasses work best when the optical centre of each lens sits in front of the pupil. The lab uses your PD to place those centres, so the number on an online glasses order is the distance between your pupils when you look into the distance. It is usually written as a single figure such as 63, or as two figures such as 31.5/31.5 when each eye is measured from the middle of the nose bridge. Those are monocular (single) PDs; add them to get the total.

Advertisement

Distance PD and near PD

Both methods above measure the distance PD, because each eye looks straight ahead: in the mirror each eye looks at its own reflection, and with a helper you look far away. Reading glasses use a near PD, a few millimetres narrower, because the eyes turn inward to read. If you are ordering reading glasses, or varifocals and other progressive lenses, ask your optician for the figures they measured; a fitting for progressive lenses also needs the height of each pupil in the chosen frame.

How far off is too far?

A lens centred away from the pupil acts as a weak prism. By Prentice's rule, the prism in prism dioptres is the distance from the optical centre in centimetres times the lens power in dioptres, so 2 mm off on a −4.00 lens gives 0.8 prism dioptres, and twice that if both lenses are off in opposite directions. Weak prescriptions tolerate a few millimetres; strong ones do not. That is why a careful home reading, repeated two or three times, is worth the trouble.

Advertisement

Getting an accurate reading

  • Check the scale first: lay a bank card along the ruler, which should cover exactly 85.6 mm.
  • Hold the ruler level and flat against your brow, not tilted towards the mirror.
  • Keep your head still between the two eyes; most errors come from moving between readings.
  • Read the centre of the pupil, the black dot, not the edge of the coloured iris.
  • Take three readings and use the average. If they differ by more than 2 mm, measure again.

Typical adult PDs

In the 2012 US Army anthropometric survey, which measured 4,082 men and 1,986 women aged 17 to 58, the average pupillary distance was 64.0 mm for men and 61.7 mm for women. Nine in ten men measured between 58.5 and 70 mm, and nine in ten women between 55.5 and 67.5 mm. A reading well outside those ranges is possible, but it is worth measuring again. Children's PDs are smaller and change as they grow, so measure a child's each time you order glasses.

Pupillary distance in the 2012 survey

PeopleAverage5th percentileMedian95th percentile
Men4,08264.0 mm58.5 mm64.0 mm70.0 mm
Women1,98661.7 mm55.5 mm62.0 mm67.5 mm

Source: ANSUR II, the US Army's 2012 anthropometric survey, public data files, interpupillary breadth.

More measuring tools

Advertisement

Advertisement

Advertisement