Actual lumber sizes
A 2x4 is not 2 by 4 inches. Once dried and planed it measures 1½ by 3½. Pick a size to see the end of the board at its real dimensions.
Nominal and actual sizes
| Nominal | Actual, inches | Actual, millimetres |
|---|---|---|
| 1x2 | 3/4 × 1 1/2 | 19 × 38 |
| 1x3 | 3/4 × 2 1/2 | 19 × 64 |
| 1x4 | 3/4 × 3 1/2 | 19 × 89 |
| 1x6 | 3/4 × 5 1/2 | 19 × 140 |
| 1x8 | 3/4 × 7 1/4 | 19 × 184 |
| 1x10 | 3/4 × 9 1/4 | 19 × 235 |
| 1x12 | 3/4 × 11 1/4 | 19 × 286 |
| 2x2 | 1 1/2 × 1 1/2 | 38 × 38 |
| 2x3 | 1 1/2 × 2 1/2 | 38 × 64 |
| 2x4 | 1 1/2 × 3 1/2 | 38 × 89 |
| 2x6 | 1 1/2 × 5 1/2 | 38 × 140 |
| 2x8 | 1 1/2 × 7 1/4 | 38 × 184 |
| 2x10 | 1 1/2 × 9 1/4 | 38 × 235 |
| 2x12 | 1 1/2 × 11 1/4 | 38 × 286 |
| 4x4 | 3 1/2 × 3 1/2 | 89 × 89 |
| 4x6 | 3 1/2 × 5 1/2 | 89 × 140 |
Minimum dressed dry sizes from PS 20-20 Revision 1 (NIST, October 2021), Table 3. Millimetres as given in the table.
Not calibrated yet Sizes are estimates until you calibrate with a bank card or a coin.
Sizes are estimates until you calibrate.
Why a 2x4 is smaller than its name
The name is the nominal size, a label. The American Softwood Lumber Standard (PS 20), published by NIST, defines the nominal size as a designation that doesn't reflect the dressed size and is greater than it. Boards are cut oversize, then dried and planed smooth, and the standard sets the smallest size a dressed board may be. For a dry 2x4 that is 1½ by 3½ inches, or 38 by 89 millimetres.
Advertisement
Dry and green sizes
The sizes here are for dry lumber, which the standard defines as dried to a moisture content of 19 percent or less. Green lumber, sold before drying, is dressed slightly larger because it shrinks as it dries: a green 2-inch board is 1-9/16 inches thick rather than 1-1/2. Either way, these are the standard's minimum dressed sizes, and a board can measure slightly more.
Checking a board on screen
Calibrate your screen, choose the size, then hold the end of the board against the drawing. A phone held upright is narrower than most boards, so there the drawing stands the board on its edge, and the widest boards run down the page. To measure a piece of wood whose size you don't know, use the on-screen ruler or the printable ruler.
More measuring tools
Advertisement
Advertisement
Advertisement